Hoist Manufacturers in Pune, Maharashtra
Product / Good Lift
Hoist Goods Lift
Equipment Details
VIMAL hoist goods lift is widely used to transfer material from one floor to another. It is to be installed with wall support at the one side and rest 2 sides can be used for loading & unloading purpose.
TECHNICAL SPECIFICATIONS
| Model | VI-GL-Hoist | |
|---|---|---|
| Type | Hoist Goods Lift | |
| Car Travel | G+1+2 | |
| Capacity of Lift | kg | 2000 |
| No of Stops | 3 | |
| No. of Openings | 04 (2 Opposite on GL, 1FL+1SL) | |
| Shaft Well Size (W*D*) | mm | 3500*2300 |
| Pit Width (Internal Dimension) | mm | 3500 |
| Pit Height (Internal Dimension) | mm | 1000 |
| Speed | mtr/min | 6 |
| Door Type | MANUAL SINGLE SIDE PULL DOOR | |
| Car Enclosure | M.S. POWDER COATED CABIN 2 MM,MACHINE PUNCHING & BENDING PANEL LED LIGHT | |
| Car Width*Car Length (Minimum Internal Dimension) | mm | W 3000 * D 2000 |
| Landing Entrance Opening | mm | W 2500 * H 2000 |
| Car Height (Minimum Internal Dimension) | mm | 2200 |
| Car Flooring | mm | M.S. Checker Plate 5 mm |
| Car Door | M.S. Collapsible Door | |
| Landing Gate on each Level | M.S. Collapsible Door | |
| No. of Doors | 6 Doors | |
| Control | Micro Processor DN Collective | |
| Drive | Hoist | |
| Motor Machine | 10 HP Hindustan Make S4 Crane Duty, Fabricated Gear Box | |
| Machine Room | mtr | 3500*2300*4 Height |
| Power Supply | 15VAC3Ph50Hz Mains & 230 V Control | |
| Wire Rope | 12MM USHA MARTIN MAKE WITH CERTIFICATE 6 x36 | |
| Digital Up/Dn Arrow Position Indicator All Landings | 4 Segment | |
| Luminous Call Indicator | All Landing | |
| Door Open Bell | If Car Door & Landing Door Open | |
| Fault Indicator In Control Panel | All Display Show | |
| Button Operation | Feather Touch Button & Call Registration Light | |
| Over Speed Protection | Electrical & Mechanical Safety | |
| Single Phase Protection | Vsp Card Board | |
| Phase Failure Protection | Vsp Card Board | |
| Terminal Limit Switch | Yes | |
| Emergency Stop Switch | Yes | |
| Interlocking Switches | Yes | |
| Reverse Phase Protection | Yes | |
| Lift Should Not Operate If Any Gates Not Properly Closed. | Yes | |
| Light Indication Showing Gates In Open Condition | Yes | |
| Break Releasing Lever And De- Locking Key For Emergency Escape During Break-Down/Power Failure. | Yes |
FEATURES
Control Panel and Wiring: The controller is a microprocessor-based controller designed for passenger lift. Microprocessor system to control all elevators functions efficiently and offers improved reliability, flexibility, and safety. The controller designs meet the code requirement of Indian standards and achieve efficient performance with high safety. Microprocessor down collective panel with call registration light and Indicator Up and Down, signal arrow fault indicator, Single Phase Protection, Overload Protection, Phase Failure Protection, Terminal Limit Switch, Emergency Stop Switch, Interlocking Switches, Reverse Phase Protection, Maintenance service system, 25 AMP Up and Down contactor Siemens/L&T make. 1 set.
Cabling: Supply and Fixing of required Elevator Wiring in Machine Room, Call Button Pendant Wiring, Cabin Dangling Wires, Door Limit Switch Wiring, Floor Limit Switch Wiring in copper 1 mm, 2 Core, 4 Core & 12 Core round flexible cable ISI Poly cab make and PVC wiring glands and GI cable tray. 1 set
Pendant: Supply and Fixing of Floor control panel powder coating box and Avon switches for industrial use. Ground floor switches plus calls registration light + 1st-floor call switch and call registration light plus rotating switch for cabin door. 2nd-floor call switch and call registration light + Emergency stop switch Up and Down indicator, floor position indicator.
Landing Door: MS collapsible manual door. Size: 2200mm x 3000mm with handle, bearings and casting gibes and rubber stopper bumper and MS painted door frame 65 x 6mm ISA and square bar of 25mm and electrical and mechanical door locks for every floor. 4 Sets
Cabin Door: MS collapsible door. Size: 2200mm x 3000mm with handle, bearings and casting gibes and rubber stopper bumper and MS painted door frame 65 x 6mm ISA and a square bar of 25mm and electrical and mechanical door locks for cabin door. 2 sets
Cabin: MS powder coated 2mm thick cabin panel for three side and top CNC machine cut sheet metal frame with LED lamp light. The bottom is MS platform with 5mm S.S. 304 checker plate. 1 set
Guide rail: MS guide ‘T’ rail heavy size 89mmx 12mm machined with fixing a plate and supporting Brackets, (Top bracket and Base bracket). Guide fixing MS Flats with CSK clip and fasteners 4 sets
Guide shoe: Supply and Fixing of MS Guide Shoe heavy duty with PVC soft liner 12mm guide rail 8 sets
Spring Buffer: Supply and Fixing of heavy duty spring buffer 4 sets
Speed Governor and Safety Block System: 6mm Dia Wire Rope Single loop with Pulleys, actuator levers, safety block (4 nos) fitted on safety frame top and actuated when the speed of cabin exceeds pre-set level. 1 set
Special Note on our System: Landing door is locked electro- mechanically. The presence of the Cabin will enable the respective Landing door to open. When Landing door and Car door is open on any floor, all other floors will show indication. No Siren for Cabin and Landing door open is provided. Up and down Final Limit switches safety is provided for Reverse and Forward. We have provided an Automatic Rescue ARD Unit for Battery Back-up to lower the Lift to the nearest lower.
landing in the event of Main Power Failure, a Special Weighing Indicator with Display weight is provided.